Brand & history

BMW Spartanburg: The Plant That Builds Every X Model

Published Aug 29, 2026 Reading time 8 min
Cover of the BMW Spartanburg: The Plant That Builds Every X Model

BMW’s largest factory anywhere is not in Germany. It is in Spartanburg County, South Carolina, it has been running since 1994, and it builds every X model BMW sells — X3 through X7, plus the XM — for the whole world rather than for America alone.

If you own an X5 anywhere on earth, it was almost certainly built there. This page covers how that came about, what the plant has made over thirty years, and how to check whether your own car came from it.

How South Carolina got a BMW factory

On June 23, 1992, Governor Carroll Campbell and BMW chairman Eberhard von Kuenheim announced that BMW would build its first full production plant outside Germany in the Upstate of South Carolina.

The choice was not obvious. BMW’s shortlist came down to South Carolina and Omaha, Nebraska, and within South Carolina the state’s own planners had initially pointed at Charleston. Campbell redirected them 200 miles inland to the Upstate: Charleston carried hurricane risk, while the Upstate had the Interstate 85 corridor, major rail, sixteen technical colleges to train a workforce, and a recent precedent in Michelin, which had come to the region in 1985. The deep water port at Charleston stayed in the plan as the export route.

The local context matters to why the state wanted it so badly. The Upstate had lost more than 60,000 textile jobs by the late 1970s. South Carolina spent $36.6 million buying 900 acres of land and about $90 million on infrastructure to land a plant then estimated at $400 million.

Groundbreaking was September 30, 1992. Construction took 23 months.

September 8, 1994: the first car

The first vehicle built at BMW Manufacturing was an E36 3 Series — a 318i — and it came off the line on September 8, 1994. The plant opened with 570 employees, chosen from roughly 100,000 applicants.

What followed was not what most people remember. Before the X models, Spartanburg built the Z3 roadster, from September 1995 to July 2002: 297,088 cars, around 40 percent of them sold in the United States. Our own records carry Z3 specification pages for model years 1996 through 2002, which is that production run seen from the other end.

The Z3 is why a generation of enthusiasts learned that an American-built BMW existed at all. The X5 arrived four years after the Z3 launched, and the plant’s character changed with it.

What Spartanburg builds now

Every X model, and only X models. Our specification records show the model years each has been certified for in the United States:

ModelUS model years in our recordsSpecification pages
X52000–2026100
X32004–202665
X62008–202648
X42015–202421
X72019–202617
XM2023–20265
Z31996–200236

The plant covers 8 million square feet, employs more than 11,000 people, and has a capacity of 450,000 vehicles a year. Its production record is 433,810 vehicles, set in 2021. BMW puts total investment since 1992 at $14.8 billion.

The export number is the surprising one

More than half of what Spartanburg builds leaves the United States, going to some 120 countries. In 2024 those exports were worth about $10 billion, which made BMW the largest exporter of vehicles from the United States by value.

That is worth sitting with. A German manufacturer’s American factory is the country’s biggest automotive exporter by value, and the cars it sends abroad are SUVs built in South Carolina and shipped out through Charleston. An X5 sold in Munich very probably crossed the Atlantic to get there.

A 2023 University of South Carolina study attributed roughly 43,000 direct and indirect jobs and $26.7 billion of annual economic impact to the plant. BMW’s own supplier count grew from a hoped-for nine local firms to more than 60 Tier 1 suppliers in South Carolina and around 300 across the country.

Four generations of X5, from the same site

The X5 has been built at Spartanburg since 2000 and is the plant’s defining product. Our records cover all four generations sold in the United States, and put together they show what happened to the car over a quarter of a century:

GenerationUS model yearsRated outputCurb weight
E532000–2006282–355 hp4,795 lb
E702007–2013260–555 hp4,960–5,379 lb
F152014–2018240–443 hp4,791–5,221 lb
G052019–2026282–523 hp4,707–5,732 lb

Two things in that table are not what people expect. The output range widens rather than climbs: the E70 already reached 555 hp with the X5 M, and the bottom of the range dropped to 240 hp in the F15 as four-cylinder and diesel versions arrived. And the lightest X5 in our records is not the oldest one — it is a G05 at 4,707 lb, lighter than any E70.

The weights come from Transport Canada’s published vehicle specifications and the outputs from EPA certification testing, so both columns are government records rather than press material. Individual figures, by model year and trim, are on the X5 model pages.

A note on “SAV”

BMW does not call the X5 an SUV in its own material. It is a Sports Activity Vehicle, and the X4 and X6 are Sports Activity Coupes — terms BMW registered and uses consistently in American brochures.

This is more than marketing pedantry for our purposes: “Sports Activity Vehicle” is one of the phrases we use to tell an American BMW brochure from a European one, because European documents do not use it. A document that says SAV was printed for this market, and the models it describes were built in South Carolina.

How to tell if your BMW was built there

The VIN answers it, and it takes one character. The eleventh position of a BMW VIN is the assembly plant, and Spartanburg is L, 0 or 9. Paste the number into our VIN decoder and it reads that position directly, alongside the model year and the manufacturer.

There is a second signal in the first three characters. American-built BMWs carry a United States world manufacturer identifier rather than a German one:

CodeCompanyVehicle type
5UXBMW ManufacturingSAV / SAC
5UMBMW ManufacturingPassenger car
5YMBMW M ManufacturingSAV / SAC (M)
4USBMW ManufacturingPassenger car

So a VIN starting 5UX and carrying an L, 0 or 9 in position eleven is a Spartanburg car twice over. Our page on the Spartanburg plant holds the same data in short form, and the plants index gives the codes for every BMW factory — including the two contract assemblers that are not BMW plants at all.

The Zentrum and the Performance Center

The plant opened its museum and visitor center, the Zentrum, in 1995: a 200-seat auditorium, a training center, event space and displays of historic vehicles. It is the reason Spartanburg became a destination rather than just a factory, and enthusiasts began gathering there almost immediately.

The BMW Performance Center followed in 2000, on the same site — the driving school where BMW teaches car control on its own facilities, and the subject of its own page here. The BMW Car Club of America moved its headquarters to nearby Greenville in 1999.

That clustering is unusual. Most manufacturers keep the factory, the museum and the driving school on three different continents; BMW put them within a few miles of each other in upstate South Carolina.

What we cannot tell you

Whether a particular car was built well, or whether Spartanburg cars differ in quality from Dingolfing cars. That question comes up constantly and there is no dataset behind any answer to it: the United States complaint database records faults against a vehicle model, not against a plant, and it does not carry the VIN position that would let anyone separate them.

We also do not hold the brochures for the plant’s earliest output. Our archive begins its continuous coverage in the 2000s, and the 1994–1995 318i and the early Z3 are outside it. If you have a brochure from those years, the submission page explains what to send.

Common questions

Which BMWs are made in America?

The X3, X4, X5, X6, X7 and XM, all at Spartanburg. Historically also the Z3 roadster from 1995 to 2002 and the E36 3 Series in the plant’s first years. Every other BMW sold in the United States is imported.

Is Spartanburg BMW’s biggest plant?

It is BMW’s largest production location, with a capacity of 450,000 vehicles a year and a record year of 433,810 in 2021 — larger than any BMW-owned plant in Germany.

Are American-built BMWs still “real” BMWs?

They are built by BMW, to BMW’s specification, in a BMW-owned plant, and more than half of them are exported to be sold as BMWs everywhere else. The X5 sold in Germany is the same car from the same line.

When did BMW start building cars in the United States?

September 8, 1994, when the first 318i came off the line. The decision was announced on June 23, 1992 and construction took 23 months from a groundbreaking on September 30, 1992.

Can you tour the BMW plant in South Carolina?

The Zentrum has been the plant’s visitor center since 1995. Tour availability and booking change, and we do not publish opening hours we cannot keep current — check with the plant directly before traveling.

Sources