BMW S58 Engine
BMW S58 (2019-): specifications, power by application and every car that has it.

- Displacement
- 3.0 L
- Layout
- Inline-6 twin-turbo M petrol
- Power range
- 453–543 hp
- Produced
- 2019–now
The S58 is the M division’s 3.0-liter twin-turbocharged inline-six, in production since 2019. It powers the M3, M4, M2, X3 M and X4 M, and it is the engine that replaced the S55 — the last M six before it.
What the S58 is
A 3.0-liter twin-turbo inline-six, certified at 2,998 cc in every US application. It shares its architecture and displacement with the standard-range B58 but is a distinct engine: two turbochargers instead of one, and a state of tune that runs from 453 hp to 543. The two are not interchangeable, and a car with one is not a car with the other — the M badge is the reliable signal.
Output by car
Unlike the B58, where output tracks the model, the S58’s figures track the version: base, Competition and CS are three different states of tune of the same engine. Figures below come from EPA certification records.
| Car | US model years | Output |
|---|---|---|
| M2 | 2023–2026 | 453–473 hp |
| M2 CS | 2026 | 523 hp |
| M3 Competition | 2021–2026 | 523 hp |
| M3 CS | 2024 | 543 hp |
| M4 | 2021–2026 | 473 hp |
| M4 Competition | 2021–2026 | 503–523 hp |
| M4 CS, M4 CSL | 2022–2026 | 543 hp |
| X3 M | 2020–2024 | 473 hp |
| X3 M Competition | 2020–2024 | 503 hp |
BMW also fitted the S58 to the X4 M and the XM. The 90 hp between the base M4 and the CSL is the widest spread of any single BMW engine we track outside the B48, and unlike the B48 it is achieved without changing the model.
Reading the badge
Three names, three outputs, one engine. In US cars the pattern holds across model lines: the base version sits at 473 hp, Competition at 503, and the CS or CSL versions at 543. The M3 is the exception — since 2021 the US market has had the Competition version at 523 hp rather than a base car, which is why the M3 line in the table above starts higher than the M4’s.
If you need to know which version a specific car is, the specification page for that model year lists the certified output by version, and the VIN decoder resolves the model year and plant.
What we do not publish
No reliability rating. BMW does not publish failure rates, and the NHTSA complaints database records complaints against a vehicle rather than an engine. For the S58 the problem is sharper than usual: NHTSA lists these cars as “3 SERIES” and “X3”, which puts an M3 alongside a 330i with the four-cylinder B48 in the same bucket. Nothing engine-specific can honestly be extracted from it.
Common questions
How much horsepower does the S58 have?
Between 453 and 543 hp in US cars, depending on the version: 453–473 in the M2, 473 in the base M4 and X3 M, 503 in the Competition versions, 523 in the M3 Competition and M2 CS, 543 in the M3 CS, M4 CS and M4 CSL.
Is the S58 the same as the B58?
No. Both are 3.0-liter inline-sixes and they share an architecture, but the B58 uses one turbocharger and makes 320–382 hp, while the S58 uses two and makes 453–543. The S58 is an M division engine.
What did the S58 replace?
The S55, which powered the previous M3, M4 and the M2 Competition through 2020.
Which cars have the S58?
The M2, M3, M4, X3 M, X4 M and XM.
Sources
- EPA — Annual certification test data: rated horsepower, displacement, engine family codes and model-year coverage for every US-certified version. All output figures on this page come from these records.
- NHTSA — datasets and APIs: the complaints database referred to above, which records complaints by vehicle rather than by engine.